DIS-2/M StreamerPro HDD Large UTP
37
Dallmeier electronic
RTP/MP4V-ES
The video data are encoded using the MPEG-4 Elementary Stream Standard. The audio
data are not taken into consideration, even if the module records with audio locally.
The encoder set as the Input must work in encoder mode MPEG-4 (Tracks ... > Encoder
settings).
The transfer is made using the RTP protocol (see above).
RTP/MJPEG
The video data are encoded using the MJPEG standard. The audio data are not taken into
consideration, even if the module records with audio locally.
The encoder set as the Input must work in encoder mode MJPEG (Tracks ... > Encoder
settings).
The transfer is made using the RTP protocol (see above).
9.3.2
Multicast / unicast
If a Mode with Multicast is selected, the undirected video and audio stream will be fed into
the network.
In this case the data packets will have the multicast IP address and the port of the sender
(server). The potential receiver (client) will only accept these packages if the same port is
configured to receive and it knows the IP address of the server.
In this case, first enter a Multicast IP Address. The address range for multicast is between
224.0.0.0 and 239.255.255.255.
IMPORTANT
Certain addresses in the multicast address range are reserved
for special purposes. If you have any doubt, contact your
network administrator.
Set a suitable Port through which you wish to send the data packets.
If, on the other hand, you select a Mode with Unicast, the video and audio stream will only
be sent to a specific receiver (client).
In this case, therefore, you must enter the client’s IP address and port as Unicast IP Address
and Port.
