![background image](http://html1.mh-extra.com/html/dallmeier/dis-1-s/dis-1-s_installation-configuration-manual_3306434043.webp)
DIS-1/S
43
Dallmeier electronic
NOTE
The smallest time period that can be set is 15 minutes.
Proceed in the same way to define larger time
areas. To set the time area, always begin at the
top left and trace the square to the desired size.
Canceling the setting
In order to cancel part or all of a setting you first
have to click on the button for the recording mode
you wish to use to overwrite the previous recording
mode setting (in the example Contact).
By tracing a square, the previously made selection
can now be completely or partially undone.
You can also set a number of different recording modes in the weekly plan.
The way that this is done is always the same:
1. Select the recording mode by clicking on the
corresponding button.
2. Specify the time period by tracing a square.
Deactivating recording
The system’s recording function can always be stopped by marking a certain time period in
the weekly plan with the not active function.
There are two different ways of deactivating recording for a specified time period:
1. Click on the not active button and then specify the time period in the way described
above.
2. Specify the time area with the right mouse button.
If you use the right mouse button the corresponding time area will always be marked as
not active, even if the button for not active is not pressed.
¾
All settings are implemented by clicking on OK.
IMPORTANT
If you click on Cancel, none of the settings made will be
implemented. All settings made before the last time the
Scheduler dialogue box was opened will, however, be retained.
Fig. 10-25
Fig. 10-26
Fig. 10-27