DIS-1/S
17
Dallmeier electronic
Transparency
In the Transparency field you can adjust the settings for the transparency of the inserted
dialogue windows and the operating interface. The higher the value set (0 to 5) the greater
the transparency.
Bit rate display
The setting in the field Show bitrate determines what is shown in the operating interface at
the bottom.
When track is selected, the bit rate set in
the Track settings menu is shown.
When actual is selected, the bit rate
currently being used for recording is shown.
When average is selected, the average bit
rate for the current recording session is
shown.
Text display
This setting adjusts the color of the text (e. g. date and time) displayed in the recording
mode
Stepmode
Here you can choose whether you want to move forward from one half-picture to the next
half-picture (Field) or from full picture to full picture (Frame) in the Forward – single
picture playback function.
Show date and time
Mark the checkbox located next to Show date/time if the date and time are to be included
in the picture during playback and Live-Mode.
Show camera name
If the camera name should be displayed in the recording mode you have to activate the
checkbox next to Show camera name.
Show live pictures
If you would like to suppress the live picture output on the monitor (CVBS and S-Video),
unclick the mark in the checkbox next to Show live pictures.
Auto repeat
If the checkbox along side auto repeat is marked, playback will take place in a loop. In this
case, when the last picture is reached the recording will be played back again from the first
recorded picture in the track.
Fig. 7-4