6
Main Application Screen
When a valid data has been detected in the configured Input file, the USBC Scoring Interface
will automatically load the data into the program. The appropriate lane information will
appear in tabs across the top of the screen. Click the tabs to view the scoring data (
).
Hover over the
<<
and
>>
buttons to scroll to additional lanes.
The output is configured to establish a
connection between the interface and the
display controller.
1.
Go to
Ports > Output > Configure >
New
.
2.
In the
Output Configuration
window
), type in a descriptive
Name
for the output.
3.
Under
Lane Assignment
, select what
set the output will display.
The number of
Lanes
and
Sets
available is determined by the RTD Configuration
(See
Section 4
).
4.
Click
OK
.
5.
In the
Port Configuration
window
), set the
Type
to
UDP/IP
.
6.
In the
Port
box, type in “21301”.
7.
Click
OK
.
8.
Repeat steps 1-7 to add additional
outputs as necessary
(typically 15 ports with 4 lanes per
output for a total of 60 lanes).
Note:
For each additional output, be
sure to change the
Port
number in
increments of one (21302, 21303, etc.).
Figure 4:
Lane Information
Figure 5:
Output Configuration
Figure 6:
Port Configuration
