Daktronics DAKT-0204-02, Руководство пользователя

Страница: 8 / 63

4 Cabinet Installation
•
Make sure to connect the power source cable correctly to avoid short-circuits. An incorrect connection
may cause electrical shocks or even fire.
• Make sure to properly connect the grounding cable.
2.3 Mounting Instructions
These are the instructions to attach the display to its permanent location. The display must be removed from
the shipping pallet. It will then be moved with a proper lifting system to its base. Then secured to the base.
1.
Open the display door, insert the 5.5mm hex tool in the keyhole and turn counterclockwise. Refer
to Figure 6 .
2. Remove the base cover, slide the cover upwards and pull it backwards. Refer to Figure 7 .
3. Push the display door firmly to secure the door.
4.
Attach the proper lifting system to the display frame.
5. To free the display from the shipping pallet, remove
the bolts.
6. Lift display and position it above the anchor points on the
permanent base. Refer to
Figure 8
.
7. Level the display and secure the display to the anchor
points with a washer (1) and nuts (2) per bolt as shown
in Figure 8 .
Insert Hex Tool in keyhole.
Turn counterclockwise.
Figure 6: Open Display Door
Slide cover up.
Pull backwards.
Figure 7: Remove Base Cover
Power/Signal Opening
Washer (1)
Nut (2)
Figure 8: Mount and Secure