GB
111
IMPORTANT: a detector programmed as a relay only relays an alarm to the other detectors. To relay
an alarm from a detector to an alarm control panel, use a radio repeater relay (SH701AX).
))))))))))))))))))))))
))))))))))))))))))))))))))))))))))
))))))))))))))))))))))
))))))))))))))))))))))))))))))))))
)))))))))))))))))))))
)))))))))))))))))))))
A.
If an alarm is activated on detector 1, only
detector 2 and the control panel will be
triggered.
B.
Detector 2 is programmed as a relay.
If an alarm is activated on detector 1, the
detector retransmits the information to
detectors 3 and 4.
Examples:
Radio range limit
Control panel
Detector 1
Detector 2
Control panel
Detector 1
Detector 3
Detector 2
Detector 4
IMPORTANT
• It is possible to programme just one “relay” detector per network.
• To be programmed as a relay, the detector must first have been programmed for recognition by
the network.
2.7 Installing the detector as a relay
If the radio range between all the detectors is insufficient, one of the detectors can be programmed as
a relay. This means that it will re-transmit alarms received to all the other detectors.