GB
107
1.
Perform the following programming sequence:
10 s max.
Press
*
then
#
on the
control panel keypad
Press and hold the
Cfg2 key
for 10 s until the control
panel responds
Cfg
1
Cfg
2
)
)
)
)
)
“beep, fire detector n° X”
then
2.
Keeping in mind the precautions outlined in the chapter entitled Choosing the best place to install
the detector, position the detector in the chosen location without fixing it in place.
3.
Test the radio range with the control panel by pressing and holding down the programming key
Cfg2.
• Satisfactory link:
the control panel issues the voice message
Beep, test fire detector n° X”
to
confirm,
•
Unsatisfactory link:
no voice message is issued. Move the detector closer to the control panel or
use a radio repeater relay.
4.
Fix the detector in place following steps 1 to 4 in chapter 2.4 Installing the detector as a standalone
device.
5.
Put the control panel back in user mode by entering:
6.
Proceed to chapter 3. Testing the detector
installer code