DAINIPPON SCREEN PLATE RITE 4300, Руководство пользователя

Страница: 55 / 167

4-17
Chapter 4 Basic Operation
When exposure of the previously set plate ends and the plate is ejected, the next
plate loads. When loading is completed, the operation door lock releases, the
plate removal request screen is displayed, and the buzzer beeps repeatedly.
Fig. 4-25 Message screen
Fig. 4-24 Plate removal request screen
6.
Press
[OK]
to stop the buzzer and then remove the exposed plate.
7. If another plate is to be set, repeat this procedure from step 2. If no more plates
are to be set, close the operation door.
NOTE
When using Version 4.3 Rev. F (or Version 6.0) or later of RENATUS or
TaigaSPACE, and YMCK output is selected, the blinking message, “!! The next
plate is same, too. !!” is displayed on the online screen during exposure of the
first three plates. In this case, the message disappears when the next plate is set.
OK
Remove exposed plate and
close door.
Recording XX%
1: Plate 1
!! The next plete is same, too. !!
OPEN STOP