DAINIPPON SCREEN PLATE RITE 4300, Руководство пользователя

Страница: 57 / 167

4-19
Chapter 4 Basic Operation
Precautions when changing AT-T modes
Automatic eject developing is possible with AT-T connection machines. However,
do not change AT-T modes (external loading, etc.) or attach/detach the stocker plate
receptacle while the PT-R is ejecting plates (while the alarm sounds). Perform AT-T
mode changes during exposure leaving enough leeway before plate ejection.
If you change the AT-T mode during ejection from the PT-R or
immediately before ejection of plate, an ejection error may result.
Also, if a replenish solution warning from the online processor or stocker plate number
warning occurs during AT-T plate ejection, an error may occur after ejection.
Check these items before commencing operation so that online processor solution
replenishment and waste solution tank errors do not occur.
Stopping the buzzer when ejecting plates
You can set the machine so that the buzzer will not sound when plates are ejected.
For more details, refer to Chapter 5 “19. Turning the Buzzer during Plate Eject On
and Off.”
CAUTION
!
If set not to beep, be sure to check that the arrow on the online screen,
which indicates ejecting to the online processor, is not flashing when you
want to insert a plate to the bridge.
Unloading
1: Plate 1
OPEN OFFLINE
This arrow flashes when ejecting to
the online processor.
Fig. 4-27 Online (ejecting direction) screen
CAUTION
!
When the online processor is busy
When a plate is to be ejected from the PT-R and the online processor is busy, it will
not be ejected until the online processor goes into standby. Also, if a plate is left on
the AT-T, the PT-R will recognize it as being in process and generate a warning
message before the plate is ejected.