DAINIPPON SCREEN PLATE RITE 4300, Руководство пользователя

Страница: 160 / 167

PT-R4300 USERS MANUAL
8-4
4.
After you have removed the plate, reattach the rear cover to its original position.
For more details, refer to Chapter 6 “1. Cleaning the Drum” steps 5 and 6.
CAUTION
!
Be sure to sufficiently tighten the rear cover screws.
If the screws are not properly tightened, an error will occur during
exposure. Also, if you tightened too much, resonation may occur at
the rear cover.
5.
Turn on the power to the PT-R and press
[START]
. Shortly after, the error
resetting screen 1 will appear and the buzzer will sound.
Fig. 8-5 Error resetting screen 1
6. Verify that the plate has been successfully removed and press [OK] . The buzzer
stops and error resetting screen 2 appears.
Fig. 8-6 Error resetting screen 2
7. Press [START] . Initialization begins.
CAUTION
! Be sure to press [START] after removing the plate. If you press
[START] before removing the plate, you might damage the PT-R. If you
have not removed the plate by this time, then turn off the PT-R again
and remove the plate. In this case, after you remove the plate and turn
on the PT-R, this error resetting screen will not appear.
OK
E417A: After verifying the removal of
the plate, press the OK button.
?
When the OK button is pressed,
initialization begins.
START
E417A: Press [START] button. Pressing
[START] button begins initializaton.
?