Daikin WAA, Руководство по установке и обслуживанию

Страница: 9 / 36

Note: All plumbing connections are made the same way
whether or not the unit has valve packages. Whether
or not you utilize our hose kits and shutoff/balancing
valve all piping connections will have to conform with
all local piping and building codes. The ability to re -
move the unit in order to perform repairs is imperative.
Note: Valves, hoses and 90-degree elbows are factory
available accessories, to be field-mounted by others.
Pipe Elbows
90-degree, 1/2" SWT × 1/2" FPT Cast Bronze elbow
fittings can be ordered to make sweat connections to the
unit supply and return pipe stubs to accept the threaded
connection of flexible hoses.
Figure 3: 90 Degree Pipe Elbow (See Table 3 for letter
dimensions)
E
D
C
A
F
Ref.
B - Thread
Size
Table 3: 90 Degree Pipe Elbow Dimensions for Figure 3
A - Nominal
Size
A B C D E F
1/2 " × 1/2 " .627 " /.631 "
1/2 "
FPT
.50 .43 .81 1.08
Condensate Hose Connection
Each unit is supplied with a 3/4" (19mm) I.D. clear vinyl
condensate hose internally trapped within the chassis.
The hose extends 14" (356mm) out of the chassis within
the piping compartment to reach the floor or the back
wall.
Field condensate piping must enter within the confines of
the cabinet (back wall or floor) similar to the supply and
return piping. Slide the vinyl hose over the condensate
pipe and clamp it.
Figure 4: Hose kit installation (field-installed)
Control Box
Escutcheon
Plate
Compressor/Control
Box Access Cover
Wiring Diagram
Fan/Coil Section Access Panel
Condensate Line–14" (356mm) Clear Vinyl
Hose Clamp
5.0"
(127mm)
9.0"
(229mm)
Air Coil
Water Return
Water Supply
Junction Box
Flexible Hoses
Ball Valves
NOTE: Valves,
(shut-off combination
balancing valves),
Hoses, (supply and
return, condensate
drain hose), also 90 o
elbows are all factory
available as accesso-
ries, to be mounted
in the field by others.
All Pipe Fittings Are
To Be Field Installed
www.DaikinApplied.com 9 IM 447-11