IM 1119-1
3
www.DaikinApplied.com
Safety Information
The installation of this equipment shall be in accordance
with the regulations of authorities having jurisdiction and all
applicable codes. It is the responsibility of the installer to
determine and follow the applicable codes. This equipment is
to be installed only by an experienced installation company
which employs trained personnel.
CAUTION
DANGER
Installation and maintenance is to be performed only by qualified
personnel who are familiar with, and in compliance with state, local
and national codes and regulations, and experienced with this type
of equipment. Sharp edges and coil surfaces are potential injury
hazards. Avoid contact with them.
To avoid electrical shock, personal injury or death:
1. Installer must be qualified, experienced technician.
2. Disconnect power supply before installation to
prevent electrical shock and damage to equipment.
WARNING
!
Disconnect all electrical power before servicing unit.
Electrical shock will cause severe injury or death.
!
!
Introduction
The factory supplied Wireless Temperature Control Kit is a field
installed option, which requires units set up for remote 24V
thermostat control. The stand-alone kit consists of a unit-mounted
Remote Control Node (RCN) assembly, and either a Daikin T9000
Wireless Programmable (#68898001) or Daikin T9000 Wireless
Non-Programmable (#68898101) thermostat, as noted.
Note:
No other thermostats will function with the T9000 RCN.
