6
Bef
ore Operation
Sec. 1
When the front panel is open
Page 35
Air supply fi lter (black)
Removes dust taken in from
the outdoor air.
Page 39
Streamer unit
Prevents mold and allergens
with the decomposition power
of the streamer discharge.
Page 36
Photocatalytic air-
purifying and
deodorising fi lter
(black)
Adsorbs mold, allergens and
odour.
Page 39
Indoor temperature
and humidity sensor
(inside the unit)
Detects the temperature and
humidity in the room.
Humidifying temperature
and humidity sensor
(inside the unit)
Detects the temperature and
humidity of the humidifi ed air to
control the degree of humidity.
Dust box
Scrapes dust off the air fi lter with the dust
brush and collects it.
Page 37
Air fi lter (white)
(2 locations at right and left)
Page 38
Display unit
INTELLIGENT EYE sensor
Detects human motion to
confi rm that a person is in
the area.
Indoor unit ON/OFF switch
• Press to start the operation with the mode set to
“AUTO” and airfl ow rate to “AUTO”.
Press the button again to stop the operation.
• Use this button when no remote controller is
immediately available.
Outdoor unit
Drain outlet
(rear side of the bottom)
Drains water out from the outdoor unit during HEATING or
HUMID HEATING operation.
Outdoor temperature sensor
(back)
Detects the outdoor temperature.
Drain hose
Drains water from the indoor unit
during COOLING, “SARARA” DRY or
DRY COOLING operation.
Model name plate
Refrigerant pipes, inter-unit
wire and humidifying hose
Earth terminal
(inside)
Humidifying unit air inlet
(front and back)
Humidifying unit air
outlet
(front)
Humidifying unit
Air inlet
(side and back)
Air outlet
01_EN_3P338603-1C.indd 6
9/28/2013 2:32:15 PM