Daikin FTXZ25NV1B Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 48

Daikin FTXZ25NV1B Скачать руководство пользователя страница 33

32

No.

Menu

Setting

Description

1

INTELLIG.EYE
AIRFLOW

Focus

The INTELLIGENT EYE sensor detects an area where there is a person and adjusts the
horizontal airfl ow direction to blow air directly on the person.

Comfort *

The INTELLIGENT EYE sensor detects an area where there is a person and adjusts the
horizontal airfl ow direction to avoid blowing air directly on the person.

< Note >

Focus

• The vertical airfl ow direction is adjusted so that the maximum airfl ow rate is achieved.

Comfort

• The unit blows air upward in the COOLING operation and downward in the HEATING operation.

COOLING

HEATING

2

AUTO OFF
time

1 HR *

Sets the time for stopping the operation to after 1 hour or after 3 hours.

• This function is not activated during the following operations.

MOLD PROOF, QUICK HEATING TIMER and
CLEANING FILTER operation

This function will be activated after the end of each operation.

• This function is not totally activated if the 24 HOUR FRESH AIR SUPPLY VENTILATION is

set.

3 HR

< Note >

• This function changes the set tempe2°C in COOLING / –2°C in HEATING and the operation stops after the preset time

elapses if it is judged that no one is in the room.

• 3 minutes before the operation stops, the OPERATION lamp blinks to lower the airfl ow rate. After that, the operation stops.
• In this mode, the operation stops automatically. It is recommended to set the AUTO OFF operation to “Off” if a small child or a sick

person is in the room. (If a person does not move much, the sensor judges that no one is in the room and the air conditioner may
be stopped.)

• If the operation has been stopped by AUTO OFF operation, the LCD will not show “OFF.”

3

BREEZE
AIRFLOW

Auto *

Sets the BREEZE AIRFLOW rate to “Auto”.

Low

Sets the BREEZE AIRFLOW rate to “Low”.

< Note >

• This function sets the airfl ow rate when the vertical airfl ow direction is set to “BREEZE”.

If you are disturbed by the unit's operating sound, set it to “Low”.

4

HUMIDIFY
AIRFLOW

Auto *

Sets the humidifi ed airfl ow rate to “Auto”.

High

Sets the humidifi ed airfl ow rate to “High”.

Low

Sets the humidifi ed airfl ow rate to “Low”.

< Note >

• This function sets the humidifi ed airfl ow rate in the “URURU” HUMIDIFY and HUMID HEATING operations.

To increase the humidifi ed airfl ow rate, set it to “High” and if you are disturbed by the sound of the humidifying operation, set it to
“Low”.

* Default setting

Useful Functions



Sec. 3

01_EN_3P338603-1C.indd 32

9/28/2013 2:33:00 PM

«
...
31
32
33
34
35
...
»

Содержание FTXZ25NV1B

















































Отзывы:

Нет отзывов