10
To set the clock
1.
Press .
2.
Press to set the clock to the current
time.
• Each time you press , the time changes by 1 minute. If
you press and hold the button, the time changes by
10 minutes.
3.
Press
.
• After “ CLOCK Set ” appears, the normal screen is
displayed again.
< To set the clock after replacing the batteries >
When the clock is set, the set time is saved in the indoor unit. After replacing the batteries,
direct the remote controller toward the indoor unit and press
. (The time will be set
automatically.) If “12:00” keeps on blinking, follow steps 1 to 3 above.
To set the position where the indoor unit is installed
Set “INSTALLED POSITION” in the menu settings.
• To adjust the airflow properly, set the “INSTALLED POSITION”.
Page 31, 33
To set the brightness of the indoor unit lamps
Press
.
BRIGHTNESS High
(default)
BRIGHTNESS Low
BRIGHTNESS Off
Note on setting the clock
• If the indoor unit’s internal clock is not set to the correct time, the ON/OFF TIMER, COMFORT SLEEP TIMER and QUICK HEATING
TIMER will not operate punctually.
Bef
ore Operation
Sec. 1
01_EN_3P338603-1C.indd 10
9/28/2013 2:32:24 PM