manualshive.com logo in svg

Daikin FTXZ25NV1B, Руководство по эксплуатации, Страница: 25 / 48

Поделиться
Скачать
Daikin FTXZ25NV1B Скачать руководство пользователя страница 25

24

To purify the air in the room

FLASH STREAMER AIR PURIFYING operation

Flash streamer discharge decomposes mold and allergic substances 
to clean the air in the room.

FRESH AIR SUPPLY VENTILATION operation

The air in the room is cleaned, taking in fresh air from outside.

< To use the operation >

 Press 

 .

•  Each time you press the button, the setting changes.

CLEAN On
FRESH On *1

CLEAN On
FRESH High *2

CLEAN On
FRESH Off

CLEAN Off
FRESH Off

*1  Ventilation is performed at an automatically adjusted airflow rate.
*2  Ventilation is performed at a high airflow rate.

•  “ 

 

 ”, “ 

 

 ”, or “ 

 ” is displayed on the LCD.

 

(These symbols are not displayed while the unit is not operating.)

< To stop the operation >

 Press 

 .

< To cancel the setting >

 Press 

 and select “Off”.

•  “ 

 

 ”, “ 

 

 ”, or “ 

 ” disappears from the LCD.

•  The operation mode returns to the previous setting.

Note on FLASH STREAMER AIR PURIFYING operation

•  When the airflow becomes weak during operation, the streamer discharge may stop temporarily to prevent a small amount of ozone 

smell coming from the air outlet.

Notes on FRESH AIR SUPPLY VENTILATION operation

•  Sounds from outdoors may be heard or odours may be taken in. Also, the unit’s operating sound becomes a little louder.
•  The unit’s operating sound may be different depending on the outdoor temperature and humidity.

Useful Functions

 Sec. 3

01_EN_3P338603-1C.indd   24

9/28/2013   2:32:49 PM

Содержание FTXZ25NV1B

















































Отзывы:

Нет отзывов