Daikin FTXM09VVJU Скачать руководство пользователя

Страница: 214 / 236

212

FTXM-V Series EDUS042101

IOD-7133

Safety Considerations

Read these

Safety Considerations

carefully before

installing the drain pan heater. After completing the

installation, check if the unit operates properly during the

start-up operation.

Meaning of

DANGER

WARNING

, and

CAUTION

symbols

Indicates an imminently hazardous

situation which, if not avoided, will

result in death or serious injury.

Indicates a potentially hazardous

situation which, if not avoided, could

result in death or serious injury.

Indicates a potentially hazardous

situation which, if not avoided, may

result in minor or moderate injury.

It may also be used to alert against

unsafe practices.

•

Inform users that they should store this installation

manual for future reference.

•

After completing the installation, make sure that the

unit operates properly during the startup operation.

•

All phases of the field-installation, including, but not

limited to, electrical, piping, and safety, must be done in

accordance with manufacturer’s instructions and must

comply with national, state, provincial, and local codes.

•

This product is a heater designed to melt snow that is

blown into the product from the outside to prevent the

drain pan of the outdoor unit from freezing.

•

Install the product with a snow-break hood on a high

stand if this product is used in heavy snow areas.

Only personnel that have been trained to install, adjust, service

or repair(hereinafter, “service”) the equipment specified in this

manual should service the equipment. The manufacturer will not

be responsible for any injury or property damage arising from

improper service or service procedures. If you service this unit,

you assume responsibility for any injury or property damage

which may result. In addition, in jurisdictions that require one or

more licenses to service the equipment specified in this manual,

only licensed personnel should service the equipment.

Improper installation, adjustment, servicing or repair of the

equipment specified in this manual, or attempting to install,

adjust, service or repair the equipment specified in this manual

without proper training may result in product damage, property

damage, personal injury or death.

WARNING

DANGER

Do not touch the heater unit without wearing gloves.
The temperature of the heater unit will become high when the

heater is turned on. Touching the heater unit with bare hands will

result in burns or injury.

WARNING

•

Wear protective gloves at the time of installation.

Touching the suction mouth or aluminum fin of the outdoor unit

may result in injury.

•

Do not install the product in places where there is danger of

exposure to inflammable gas leakage.

If the gas leaks and builds up around the unit, it may catch fire.

•

Do not grab the top plate of the outdoor unit carelessly when

removing the top plate.

The sharp edge of the top plate may cause injury.

•

Do not install the outdoor unit in places where small animals

may nest in the outdoor unit.

If small animals intrude and touch the internal parts of the outdoor

unit, the outdoor unit may malfunction, generate smoke, or ignite

Advise the user to keep the place clean.

•

Do not touch the heater unit with bare hands.

The temperature of the heater unit will become high when the

heater is turned on.

Touching the heater unit with bare hands may result in burns or

injury.

DANGER

Cancer and Reproduc

�

ve Harm

www.P65Warnings.ca.gov

PROP 65 WARNING

FOR CALIFORNIA CONSUMERS

0140M00517-A

WARNING

13.17 <KEH063A4E(A)> Drain Pan Heater

Содержание FTXM09VVJU












































































































































































































































Результаты поиска

Содержание FTXM09VVJU

Отзывы:

Похожие инструкции для FTXM09VVJU

Бренды по названию

Популярные бренды

Daikin FTXM09VVJU, Инженерные данные

Результаты поиска

Содержание FTXM09VVJU

Отзывы:

Похожие инструкции для FTXM09VVJU

Бренды по названию

Популярные бренды