Daikin FTXM09VVJU, Инженерные данные

Страница: 125 / 236

FTXM-V Series EDUS042101
123
3P627027-1
1-3-5 Disposal
When removing refrigerant from a system, either for servicing
or decommissioning, it is recommended good practice that all
refrigerant is removed safely.
• When transferring refrigerant into cylinders, ensure that only
appropriate refrigerant recovery cylinders are employed.
• Ensure that the correct number of cylinders for holding the
total system charge is available.
• Ensure that all cylinders to be used are designated for the
recovered refrigerant and labelled for that refrigerant (i. e.
special cylinders for the recovery of refrigerant).
• Cylinders should be complete with pressure-relief valve and
associated shut-off valves in good working order.
• Empty recovery cylinders should be evacuated and, if
possible, cooled before recovery occurs.
• The recovery equipment should be in good working order with
a set of instructions concerning the equipment that is at hand
and should be suitable for the recovery of all appropriate
refrigerants including, when applicable, FLAMMABLE
REFRIGERANT.
• In addition, a set of calibrated weighing scales should be
available and in good working order.
• Hoses should be complete with leak-free disconnect
couplings and in good condition.
• Before using the recovery machine, check that it is in
satisfactory working order, has been properly maintained and
that any associated electrical components are sealed to
prevent ignition in the event of a refrigerant release.
• Consult the manufacturer if in doubt.
• The recovered refrigerant should be returned to the refrigerant
supplier in the correct recovery cylinder, and the relevant
waste transfer note should be arranged.
• Do not mix refrigerants in recovery units and especially not in
cylinders.
• If compressors or compressor oils are to be removed, ensure
that they have been evacuated to an acceptable level to make
certain that FLAMMABLE REFRIGERANT III does not remain
within the lubricant.
• The evacuation process should be carried out prior to
returning the compressor to the suppliers.
• Only electric heating of the compressor body should be
employed to accelerate this process.
• When oil is drained from a system, oil drainage should be
carried out safely.
1-4 Glossary
Your dealer
Sales distributor for the product.
Authorized installer
Technically skilled person who is qualified to install the
product.
User
Person who is owner of the product and/or operates the
product.
Applicable legislation
All international, national and local directives, laws,
regulations and/or codes that are relevant and applicable for
a certain product or domain.
Service company
Qualified company which can perform or coordinate the
required service on the product.
Installation manual
Instruction manual specified for a certain product or
application, explaining how to install, configure and maintain
it.
Operation manual
Instruction manual specified for a certain product or
application, explaining how to operate it.
Maintenance instructions
Instruction manual specified for a certain product or
application, which explains (if relevant) how to install,
configure, operate and/or maintain the product or
application.
Accessories
Labels, manuals, information sheets and pieces of
equipment that are delivered with the product and that need
to be installed according to the instructions in the
accompanying documentation.
Equipment sold separately
Equipment made or approved by Daikin that can be
combined with the product according to the instructions in
the accompanying documentation.
Field supply
Equipment NOT made by Daikin that can be combined with
the product according to the instructions in the
accompanying documentation.
8
01_EN_3P627027-1.indd 8 2021/02/08 15:05:34