Daikin FTXM09VVJU страница 154 Скачать руководство пользователя

Страница: 154 / 236

152

FTXM-V Series EDUS042101

3P124623-1E

∗

Zone control from the central remote controller

Zone control is available from the central remote controller. With it, it is possible to make unified settings for mul-

tiple groups, so setting operations are greatly simplified.

•

Any setting you make within a given zone will apply to all groups in the said zone.

•

A maximum of 64 zones can be set from a single central remote controller.

(Each zone contains a maximum of 64 groups.)

•

Zones can be set randomly from the central remote controller.

SAFETY CONSIDERATIONS

Please read these “SAFETY CONSIDERATIONS”

carefully before installing air conditioning equipment

and be sure to install it correctly.

After completing the installation, make sure that the

unit operates properly during the start-up operation.

Please instruct the customer on how to operate the unit

and keep it maintained.

Also, inform customers that they should store this installation

manual along with the operation manual for future reference.

This air conditioner comes under the term “appliances

not accessible to the general public”.

Meaning of danger, warning, caution and note sym-

bols.

DANGER

..... Indicates an imminently hazardous

situation which, if not avoided, will

result in death or serious injury.

WARNING

....Indicates a potentially hazardous sit-

uation which, if not avoided, could

result in death or serious injury.

CAUTION

.... Indicates a potentially hazardous

situation which, if not avoided, may

result in minor or moderate injury. It

may also be used to alert against

unsafe practices.

NOTE

........... Indicates situation that may result

in equipment or property-damage-

only accidents.

Keep these warning sheets handy so that you can

refer to them if needed.

Also, if this equipment is transferred to a new user, make

sure to hand over this operation manual to the new user.

DANGER

• Any abnormalities in the operation of the air conditioner

such as smoke or fire could result in severe injury or death.

Turn off the power and contact your dealer immedi-

ately for instructions.

• Do not install the unit in an area where flamma-

ble materials are present due to risk of explo-

sion resulting in serious injury or death.

• Safely dispose of the packing materials.

Packing materials, such as nails and other metal or

wooden parts, may cause stabs or other injuries.

Tear apart and throw away plastic packaging bags

so that children will not play with them. Children

playing with plastic bags face the danger of death

due to suffocation.

WARNING

• Ask your dealer for installation of the air conditioner.

Incomplete installation performed by yourself may

result in a water leakage, electric shock, and fire.

• Ask your dealer for improvement, repair, and maintenance.

Incomplete improvement, repair, and maintenance may

result in a water leakage, electric shock, and fire.

• Improper installation or attachment of equipment or

accessories could result in electric shock, short-cir-

cuit, leaks, fire or other damage to the equipment. Be

sure only to use accessories made by Daikin which

are specifically designed for use with the equipment

and have them installed by a professional.

• Ask your dealer to move and reinstall the air

conditioner or the remote controller.

Incomplete installation may result in a water leak-

age, electric shock, and fire.

• Never let the indoor unit or the remote controller get wet.

It may cause an electric shock or a fire.

Содержание FTXM09VVJU












































































































































































































































Результаты поиска

Содержание FTXM09VVJU

Отзывы:

Похожие инструкции для FTXM09VVJU

Бренды по названию

Популярные бренды

Daikin FTXM09VVJU, Инженерные данные

Результаты поиска

Содержание FTXM09VVJU

Отзывы:

Похожие инструкции для FTXM09VVJU

Бренды по названию

Популярные бренды