Daikin FTXM09VVJU Скачать руководство пользователя страница 173

Страница: 173 / 236

FTXM-V Series EDUS042101

171

3P124623-1E

Call the unit whose system you wish to look up using

the arrow keys.
The “

” on all groups in the same system as the

displayed group will light up.
Of those, the “

” display in all groups which have

cooling/heating selection privilege will blink.

In this example, individual units 1-00, 1-03, 1-05,

1-06, 1-07, 2-02, and 2-03 are in the same system,

and 1-05 has the cooling/heating selection privi-

lege.

To look up other systems, call up all the units you wish

to look up using the arrow keys.

Pressing the inspection/test run button one more time

gets rid of the system display and ends it.

The unit will enter the individual screen automatically if

nothing is done for one minute in the system display

screen.

This function may not be available for all connected

outdoor units, in which case “REF CIRCUIT” will blink.

It will also not be correctly displayed if DIII-NET exten-

sion ADP is used.

Display of time to clean (Fig. 16)

This central remote controller displays the time to clean

the air filter or air cleaner element for each group or any

given group by utilizing two types of signs. The display
“

” tells the time to clean the air filter or the air

cleaner element of some group.

If a cleaning sign is displayed

A filter or element in some group is ready to be

cleaned.

Press the ARROW KEY BUTTON, and

search the groups displaying “

” or

“

” (The group may be plural.)

Press the FILTER SIGN RESET BUT-

TON, and the display “

” disap-

pears. (Including all the groups where the

air filter has been cleaned.)

NOTE

Be sure to check the display

“

” has

disappeared at this point. The appearance of the

above display is a sign that the air filter or air cleaner

element of some group still needs cleaning.

Clean or change the air filter or air cleaner

element.

For further details, see the operation manual

attached to each indoor unit. (Clean or change the

air filter or air cleaner element of all the groups dis-
playing “

” or “

”.)

Содержание FTXM09VVJU












































































































































































































































Результаты поиска

Содержание FTXM09VVJU

Отзывы:

Бренды по названию

Популярные бренды

Daikin FTXM09VVJU, Инженерные данные

Результаты поиска

Содержание FTXM09VVJU

Отзывы:

Бренды по названию

Популярные бренды