Daikin EWAQ016BAW, Инструкция по установке и эксплуатации

Страница: 41 / 48

EWAQ016~ EWYQ016~064BAW
Packaged air-cooled water chiller
4PW70082-1C – 2013.07
Installation and operation manual
36
Programming quiet mode
Programming quiet mode is carried out as follows:
1 Press the button to enter the programming/consulting mode.
2 Select the operation mode you would like to program by means
of the
and buttons.
The actual mode is blinking.
3 Press the button to confirm the selected mode.
4 Consult the actions by means of the and buttons.
5 Hold down the button for 5 seconds to the program the
detailed actions
The first programmed action appears.
6 Use the button to select the action number you would like to
program or to modify.
7 Use the and buttons to set the correct action time.
8 Use the button to select or deselect as action.
9 Repeat steps 6 to 8 to program the other actions of the selected
mode.
When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.
10 Press the button for 5 seconds to store the programmed
actions.
If the button is pressed when action number 3 is displayed,
actions 1, 2 and 3 are stored but 4 is deleted.
By pressing the
button several times, you return to previous
steps in this procedure and finally return to normal operation.
11 You automatically return to step 5, start again to program the
following day.
5.9.3. Consulting programmed actions
Consulting space heating actions
Consulting space cooling heating, space heating or quiet mode is
carried out as follows.
1 Press the button to enter the programming/consulting mode.
2 Select the operation mode you would like to consult by means of
the
and buttons.
The actual mode is blinking.
3 Press the button to confirm the selected mode.
The actual day is blinking.
4 Select the day you would like to consult by means of the
and
buttons.
The selected day is blinking.
5 Press the button to confirm the selected day.
The first programmed action of the selected day appears.
6 Use the and buttons to consult the other
programmed actions of that day.
This is called the readout mode. Empty program actions (e.g. 4)
is not displayed.
By pressing the button several times, you return to previous
steps in this procedure and finally return to normal operation.
5.9.4. Tips and tricks
Programming the next day(s)
After confirming the programmed actions of a specific day (i.e. after
pressing the button for 5 seconds), press the
button once. You
can now select another day by using the and buttons
and restart consulting and programming.
Copying programmed actions to next day
In space heating program it is possible to copy all programmed
actions of a specific day to the next day (e.g. copy all programmed
actions from "
" to " ").
To copy programmed actions to the next day, proceed as follows:
1 Press the button.
The actual mode is blinking.
2 Use the and buttons to select the mode you want
to program.
The selected mode is blinking.
You can leave programming by pressing the
button.
3 Press the button to confirm the selected mode.
The actual day is blinking.
4 Select the day you would like to copy to the next day by means
of the
and buttons.
The selected day is blinking.
You can return to step 2 by pressing the
button.
5 Press the and buttons simultaneously for 5 seconds.
After 5 seconds the display will show the next day (e.g. " " if
" " was selected first). This indicates that the day has been
copied.
You can return to step 2 by pressing the
button.
INFORMATION
Returning to previous steps in the programming procedure
without saving modified settings is done by pressing the
button.
INFORMATION
Returning to previous steps in this procedure is done by
pressing the
button.
4PWEN70082-1C.book Page 36 Wednesday, September 25, 2013 7:31 AM