Daikin ERGA04EAV3A, Руководство по установке для специалистов

Страница: 225 / 264

14 | Troubleshooting
Installer reference guide
225
ERGA04~08EAV3(A) + EHBH/X04+08EA/EJ6V+9W
Daikin Altherma 3 R W
4P629085-1 – 2020.08
14 Troubleshooting
Contact
For the symptoms listed below, you can try to solve the problem yourself. For any
other problem, contact your installer. You can find the contact/helpdesk number
via the user interface.
1 Go to [8.3]: Information > Dealer information .
In this chapter
14.1 Overview: Troubleshooting .................................................................................................................................................... 225
14.2 Precautions when troubleshooting........................................................................................................................................ 225
14.3 Solving problems based on symptoms................................................................................................................................... 226
14.3.1
Symptom: The unit is NOT heating or cooling as expected .................................................................................. 226
14.3.2 Symptom: Hot water does NOT reach the desired temperature ......................................................................... 227
14.3.3 Symptom: The compressor does NOT start (space heating or domestic water heating) .................................... 227
14.3.4 Symptom: The system is making gurgling noises after commissioning................................................................ 227
14.3.5 Symptom: The pump is making noise (cavitation) ................................................................................................ 228
14.3.6 Symptom: The pressure relief valve opens ........................................................................................................... 228
14.3.7 Symptom: The water pressure relief valve leaks................................................................................................... 229
14.3.8 Symptom: The space is NOT sufficiently heated at low outdoor temperatures .................................................. 229
14.3.9 Symptom: The pressure at the tapping point is temporarily unusually high ....................................................... 230
14.3.10 Symptom: Tank disinfection function is NOT completed correctly (AH-error) .................................................... 230
14.4 Solving problems based on error codes................................................................................................................................. 231
14.4.1
To display the help text in case of a malfunction.................................................................................................. 231
14.4.2 Error codes: Overview............................................................................................................................................ 231
14.1 Overview: Troubleshooting
This chapter describes what you have to do in case of problems.
It contains information about:
▪ Solving problems based on symptoms
▪ Solving problems based on error codes
Before troubleshooting
Carry out a thorough visual inspection of the unit and look for obvious defects such
as loose connections or defective wiring.
14.2 Precautions when troubleshooting
WARNING
▪
When carrying out an inspection on the switch box of the unit, ALWAYS make
sure that the unit is disconnected from the mains. Turn off the respective circuit
breaker.
▪
When a safety device was activated, stop the unit and find out why the safety
device was activated before resetting it. NEVER shunt safety devices or change
their values to a value other than the factory default setting. If you are unable to
find the cause of the problem, call your dealer.
DANGER: RISK OF ELECTROCUTION