Daikin EPRA08EAV3, Руководство по установке для специалистов

Страница: 287 / 292

11/13
Breadcrumb Field code Setting name Range, step
Default value
Date Value
Field settings table Installer setting at variance with
default value
9.I [9-01] R/W 15~37°C, step: 1°C
25°C
9.I [9-02] R/W 18~22°C, step: 1°C
22°C
9.I [9-03] R/W 5~18°C, step: 1°C
7°C
9.I [9-04] R/W 1~4°C, step: 1°C
1°C
9.I [9-05] R/W 15~37°C, step: 1°C
25°C
9.I [9-06] R/W [2-0C]=2:
37~65, step: 1°C
65°C
[2-0C] ≠ 2:
37~55, step: 1°C
55°C
9.I [9-07] R/W 5~18°C, step: 1°C
7°C
9.I [9-08] R/W 18~22°C, step: 1°C
22°C
9.I [9-09] R/W 1~18°C, step: 1°C
18°C
9.I [9-0A] R/W [3-07]~[3-06]°C, step: 0,5°C
23°C
9.I [9-0B] R/W [3-09]~[3-08]°C, step: 0,5°C
23°C
9.I [9-0C] R/W 1~6°C, step: 0,5°C
1 °C
9.I [9-0D] R/W 0~8, step: 1
0: No limitation
1~4: 90~60% pump speed
5~8: 90~60% pump speed during
sampling
6: 80% pump speed during sampling
9.I [9-0E]
6
9.I [C-00] R/W 0: Solar priority
1: Heat pump priority
9.I [C-01] 0
9.I [C-02] R/W
0: No
1: Bivalent
9.I [C-03] R/W -25~25°C, step: 1°C
0°C
9.I [C-04] R/W 2~10°C, step: 1°C
3°C
9.I [C-05] R/W 0: MMI requests (incl. quick logic)
1: 1 contact
2: 2 contacts
9.I [C-06] R/W 0: MMI requests (incl. quick logic)
1: 1 contact
2: 2 contacts
9.I [C-07] R/W 0: LWT control
1: Ext RT control
2: RT control
9.I [C-08] R/W 0: No
1: Outdoor sensor
2: Room sensor
9.I [C-09] R/W 0: Normally open
1: Normally closed
9.I [C-0A] 0
9.I [C-0B]
0
9.I [C-0C] 0
9.I [C-0D]
0
9.I [C-0E] 0
9.I [D-00] R/W 0: None
1: BSH only
2: BUH only
3: All heaters
9.I [D-01] R/W 0: No
1: Active open
2: Active closed
3: Smart Grid
9.I [D-02] R/W
0: No DHW pump
1: Instant hot water
2: Disinfection
3: Circulation
4: Circulation and disinfection
9.I [D-03] R/W 0: No
1: increase 2°C, span 4°C
2: increase 4°C, span 4°C
3: increase 2°C, span 8°C
4: increase 4°C, span 8°C
9.I [D-04] R/W 0: No
1: Pwr consmp ctrl
9.I [D-05] R/W 0: Forced off
1: As normal
9.I [D-07] R/W (*3)
R/O (*4)
0: No
1: Yes
9.I [D-08] R/W 0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
What is the allowed LWT undershoot during cooling start-up?
Bivalent hysteresis temperature.
What is the mimimum desired LWT for main zone in heating?
What is the maximum desired LWT for main zone in cooling?
What is the mimimum desired LWT for add. zone in heating?
What is the maximum desired LWT for add. zone in heating?
What is the mimimum desired LWT for add. zone in cooling?
What is the maximum desired LWT for add. zone in cooling?
Room temperature hysteresis.
Pump speed limitation
What is the room buffering temperature in heating?
What is the room buffering temperature in Cooling?
What is the mimimum desired LWT for main zone in cooling?
Leaving water temperature overshoot temperature.
Which type of external sensor is installed?
What is the required alarm output contact type?
--
--
Domestic heating water priority.
--
Is an external backup heat source connected?
Bivalent activation temperature.
What is the thermo request contact type for the main zone?
Is the pump allowed to run if prefer. kWh rate PS is cut?
Is a solar kit connected?
Is an external kWh meter used for power measurement?
What is the unit control method in space operation?
What is the thermo request contact type for the add. zone?
--
--
--
--
Which heaters are permitted if prefer. kWh rate PS is cut?
Contact type of preferential kWh rate PS installation?
Which type of DHW pump is installed?
Leaving water temperature compensation around 0°C.
Is a demand PCB connected?
(*1) *6V_(*2) *9W_
(*3) ETB*_(*4) ETV*_
(*5) *X*_(*6) *H*_
(*7) *18*_(*8) *23*
4P634891-1 - 2021.03