Daikin EPRA08EAV3, Руководство по установке для специалистов

Страница: 285 / 292

9/13
Breadcrumb Field code Setting name Range, step
Default value
Date Value
Field settings table Installer setting at variance with
default value
9.I [2-09] R/W -5~5°C, step: 0,5°C
0°C
9.I [2-0A] R/W -5~5°C, step: 0,5°C
0°C
9.I [2-0B] R/W -5~5°C, step: 0,5°C
0°C
9.I [2-0C] R/W 0: Underfloor heating
1: Fancoil unit
2: Radiator
9.I [2-0D] R/W 0: Underfloor heating
1: Fancoil unit
2: Radiator
9.I [2-0E] R/W 20~50 A, step: 1 A
50 A
9.I [3-00] R/W 0: No
1: Yes
9.I [3-01] 0
9.I [3-02]
1
9.I [3-03] 4
9.I [3-04] 2
9.I [3-05]
1
9.I [3-06] R/W 18~30°C, step: 1°C
30°C
9.I [3-07] R/W 12~18°C, step: 1°C
12°C
9.I [3-08] R/W 25~35°C, step: 1°C
35°C
9.I [3-09] R/W 15~25°C, step: 1°C
15°C
9.I [3-0A] 0
9.I [4-00] R/W 0: Disabled
1: Enabled
2: Only DHW
9.I [4-01] R/W 0: None
1: BSH
2: BUH
9.I [4-02] R/W 14~35°C, step: 1°C
35°C
9.I [4-03] R/W 0: Restricted
1: Allowed
2: Overlap
3: Compressor off
4: Legionella only
9.I [4-04] [E-0D] =0
R/O
[E-0D] =1
R/W 0: Continuous pump operation
1: Non continuous pump operation
2: OFF
9.I [4-05]
0
9.I [4-06] R/W 0: Manual
1: Automatic
2: Auto red SH/ DHW ON
3: Auto red SH/ DHW OFF
4: Auto normal SH/ DHW OFF
9.I [4-07]
6
9.I [4-08] R/W 0: No limitation
1: Continuous
2: Digital inputs
9.I [4-09] R/W 0: Current
1: Power
9.I [4-0A] R/W 1: 1/1+2 (*1) (*2)
2: 1/2
3: 1/2 + 1/1+2 in emergency
9.I [4-0B] R/W 1~10°C, step: 0,5°C
1°C
9.I [4-0D] R/W 1~10°C, step: 0,5°C
3°C
9.I [4-0E] 6
9.I [5-00] R/W 0: No
1: Yes
9.I [5-01] R/W -15~35°C, step: 1°C
0°C
9.I [5-02] R/W
0: Disabled
1: Enabled
9.I [5-03] R/W -15~35°C, step: 1°C
0°C
9.I [5-04] R/W 0~20°C, step: 1°C
10°C
9.I [5-05] R/W 0~50 A, step: 1 A
50 A
9.I [5-06] R/W 0~50 A, step: 1 A
50 A
9.I [5-07] R/W 0~50 A, step: 1 A
50 A
9.I [5-08] R/W 0~50 A, step: 1 A
50 A
9.I [5-09] R/W 0~20 kW, step: 0,5 kW
20 kW
9.I [5-0A] R/W 0~20 kW, step: 0,5 kW
20 kW
9.I [5-0B] R/W 0~20 kW, step: 0,5 kW
20 kW
9.I [5-0C] R/W 0~20 kW, step: 0,5 kW
20 kW
9.I [5-0D] R/W (*1)
R/O (*2)
0: 230V, 1~ (*1)
1: 230V, 3~ (*1)
2: 400V, 3~ (*2)
9.I [5-0E] 1
9.I [6-00] R/W
2~40°C, step: 1°C
8°C
Adjust the offset on the measured room temperature
Adjust the offset on the measured room temperature
What is the required offset on the measured outdoor temp.?
What emitter type is connected to the main LWT zone?
What emitter type is connected to the additional LWT zone?
What is the maximum allowed current over the heatpump ?
Is auto restart of the unit allowed?
--
--
--
--
--
What is the maximum desired room temperature in heating?
What is the mimimum desired room temperature in heating?
What is the maximum desired room temperature in cooling?
What is the minimum desired room temperature in cooling?
What is the BUH operation mode?
Which electric heater has priority?
Below which outdoor temperature is heating allowed?
Operation permission of the booster heater.
Water pipe freeze prevention
--
--
Emergency
--
Which power limitation mode is required on the system?
Which power limitation type is required?
Backup heater configuration
Automatic cooling/heating changeover hysteresis.
Automatic cooling/heating changeover offset.
--
Equilibrium: Deactivate backup heater (or external backup heat source in case of a
bivalent system) above the equilibrium temperature for space heating?
What is the equilibrium temperature for the building?
Space heating priority.
Space heating priority temperature.
Set point correction for domestic hot water temperature.
What is the requested limit for DI1?
What is the requested limit for DI2?
What is the requested limit for DI3?
What is the requested limit for DI4?
What is the requested limit for DI1?
What is the requested limit for DI2?
What is the requested limit for DI3?
What is the requested limit for DI4?
Backup heater voltage
--
The temperature difference determining the heat pump ON temperature.
(*1) *6V_(*2) *9W_
(*3) ETB*_(*4) ETV*_
(*5) *X*_(*6) *H*_
(*7) *18*_(*8) *23*
4P634891-1 - 2021.03