Daikin EHBH04CA, Руководство по установке для специалистов

Страница: 40 / 106

Installer reference guide
39
08 + ERLQ004~008
Daikin Altherma - Low Temperature Split
4P313774-1 – 2012.05
7 Installation
From the rear
5 Reinstall the faceplate onto the wallplate.
Fixation of the user interface to the wall in case of installation as
room thermostat
1
Insert a screwdriver into the slots underneath the user interface
and carefully separate the faceplate from the wallplate.
2 Fix the wallplate of the user interface to wall.
3 Connect the wires to the user interface as shown below.
From the rear
From the left
From the top
From the top center
4 Reinstall the faceplate onto the wallplate.
7.6.7 To connect the shut-off valve
1 Connect the valve control cable to the appropriate terminals as
shown in the illustration below.
2 Fix the cable with cable ties to the cable tie mountings.
a Notch this part for the wiring to pass through with nippers
etc.
b Secure the wiring to the front part of the casing using the
wiring retainer and clamp.
NOTICE
Be careful NOT to pinch the wiring when attaching the
frontplate to the unit.
NOTICE
The PCB is mounted in the faceplate of the user interface.
Be careful NOT to damage it.
b
a
PCB
1x
b
a
PCB
1x
a
PCB
b
1x
a Notch this part for the wiring to pass through with nippers
etc.
b Secure the wiring to the front part of the casing using the
wiring retainer and clamp.
NOTICE
Wiring is different for a NC (normal closed) valve and a NO
(normal open) valve.
a
b
PCB
b
1x
a
PCB
b
b
1x
X1M
X2M
5
6
7
M2S
X1M
X2M
5
6 7
M2S
NO NC