Operation methods
53
Performing forced reset
After resetting the master controller setting or MAIN/SUB settings of the simple touch controllers, or the
address setting for each Group for whatever reason, you can apply the new settings without turning off the
power supply using the “Forced Reset” function.
2
[SETTINGS screen]
3
To reset
1
Before operating the simple touch
controller, make the required setting
changes on the Printed Circuit Board
of the simple touch controller, and
install the simple touch controller
back to the original status for use.
(It can be done with the power supply
on.)
2
Tap “Forced Reset” in the menu on
the left.
3
Tap
to proceed.
•
The setting will be renewed.
•
When setting is complete, the simple touch
controller will restart.
Please wait until the HOME screen is
displayed.
Note:
•
If there are many indoor units connected to
the simple touch controller, the resetting
process will take a long time.
•
After the forced reset is complete, the clock
will be reset. Please set the clock again.
(See page 39.)
•
Schedule timers and Zone settings will have
been retained.