Operation methods
45
Setting the Group addresses of the indoor units to be controlled
Up to 2 simple touch controllers can be used as shown in the “System configuration” on page 05,
to control anywhere up to a maximum of 128 Groups of indoor units. If 2 controllers are to be used, Group
addresses must be set.
This is because 1 simple touch controller can only monitor and operate a maximum of 64 Groups.
1
[SETTINGS screen]
2
To set
1
Tap “Group Addresses” in the menu
on the left.
2
Tap “Group 01-00 to 04-15” or
“Group 05-00 to 08-15”.
•
When changing the Group address range
for the controller, the following panel will
be displayed.
3
3
Tap
and the system will
automatically reset.
•
The screen will switch to the HOME
screen and the set address will be
displayed on the operation details panel.
[HOME screen]
If you want to cancel the change,
tap
.