Read before operation
10
Main operation screens (3/4)
[ZONE view]
This view is used for Zone control.
(2)
(2)
(5)
(5)
(6)
(6)
(1)
(1)
(4)
(4)
(7)
(7)
(3)
(3)
(1)
View switching tabs
•
Tap
to switch to the ALL GROUP
view.
•
Tap
to switch to the GROUP view.
(2)
Zone panels
•
Set Zones, check Zone ON/OFF status,
or select one of the Zone panels to view/
configure operation settings for the Zone.
•
Scroll sideways to see more Zones.
•
Zones are not pre-registered in the simple
touch controller by default. Please register
Groups to Zones before proceeding with
Zone control. (Pages 16, 17)
(3)
Tap to add/delete Groups to/from a Zone.
(Pages 16, 17)
•
It is not possible to register one Group in
multiple Zones.
(4)
Current and the total pages of the ZONE
view
(5)
Tap to go to the next page of the Zone
panel.
(6)
Operation details panel
•
Shows the current settings of the
representative Group (Group with the
lowest address in the Zone.).
•
Tap a setting item to change its setting.
(The settings made in ZONE view will be
applied to all the Groups included in the
Zone.)
•
The setting items and methods are the
same as those of Group control. (Page 08)
(7)
Shows the Zone number of the selected
Zone.
Note:
•
In ZONE view, ventilation mode cannot be
changed.
To change the ventilation mode setting,
switch to GROUP view and then change the
setting.