Operation methods
51
Restrictions on remote controller operation in each operation control
mode (3/3)
Remote controller enabled timer
Command made from 0AM
3AM
6AM
9AM
12PM
3PM
6PM
12AM
Remote controller
ON/OFF
operation is
disabled. (A)
Same as (B)
Same
as (A)
ON/OFF operation is possible
only during the preset hours
set in the schedule timer. (B)
9PM
Schedule timer
[Usage example]
OFF
ON
Operation
ON by STC
Operation
OFF by STC
ON/OFF operation
by RC is disabled.
ON/OFF operation
by RC is disabled.
OFF
Timer ON
6:00 AM
Timer OFF
3:00 PM
ON
ON/OFF operation
by RC is enabled
at the timer ON time.
Operation OFF
at the timer OFF
time.
Timer ON
6:00 AM
ON/OFF operation
by RC is enabled
at the timer ON
time again.
ON/OFF operation by RC
is possible at any time during the
preset hours of schedule timers.
Timer OFF
12:00 AM
Operation always
set to turn OFF at
a certain time to
prevent forgetting
to turn off the unit.
Note:
•
Regardless of schedule timer times, ON/OFF operation by the simple touch controller is possible.
However, even if operation was started by the simple touch controller, when the OFF time of the
timer arrives, the relevant units will be turned off. (The scheduled OFF timer will be prioritized.)