Daikin DTP401A61, Руководство по эксплуатации, Страница: 22 / 63

To table
of contents
Operation methods
21
Setting the temperature setpoint
[HOME screen]
Group monitoring panel Group monitoring panel
Operation details panel Operation details panel
2
6
1
„
To set
1
From the HOME screen, select the
target units (a Group, all Groups, or a
Zone) via the relevant view.
•
In the image, Group 001 is selected as an
example.
2
On the operation details panel, tap the
setpoint setting area.
•
The setting panel will open.
4
3 5
3
Tap the units you want to use.
(°C or °F)
4
Tap [ ] or [ ] to set the desired
setpoint.
•
The temperature rises 1°C every time
[ ] is tapped.
•
The temperature drops 1°C every time
[ ] is tapped.
5
Tap . (The setting has not been
applied at this point.)
•
The setting panel will close.
•
The setpoint displayed on the operation
details panel will be updated.
If you want to cancel, tap .
•
The setting panel will close without
updating the setting.
6
Tap again on the operation
details panel to apply the setting.
• The setpoint on the Group monitoring
panel will be changed to the new setting.
If you want to cancel the setting change,
tap
.
•
The setpoint will revert to the previous setting.
Note:
• If a setpoint cannot be set for the target units,
“ ” will be displayed in the setpoint area.
•
Temperature adjustment cannot be performed
if the selected Group’s air conditioners are in
fan mode.