Operation methods
19
Setting the Operation mode/Ventilation mode
[HOME screen]
Group monitoring panel
Group monitoring panel
Operation details panel
Operation details panel
2
5
1
To set
1
From the HOME screen, select the
target units (a Group, all Groups, or a
Zone) via the relevant view.
•
In the image, Group 001 is selected as an
example.
2
On the operation details panel, tap the
mode setting area.
•
The setting panel will open.
3
4
3
Tap the operation mode you want to set.
•
For details on operation modes,
see page 20.
4
Tap
. (The setting has not been
applied at this point.)
•
The setting panel will close.
•
The operation mode displayed on the
operation details panel will be updated.
If you want to cancel, tap
.
•
The setting panel will close with no setting
update.
5
Tap
again on the operation
details panel to apply the setting.
•
The icon on the Group monitoring panel
will change to the new setting.
If you want to cancel the setting change,
tap
.
•
The operation mode will revert to the
previous setting.
Note:
•
Some modes may not be available
depending on the type of indoor unit.