Daikin DCC601A51 Скачать руководство пользователя страница 24

Страница: 24 / 28

Installer reference guide

DCC601A51

intelligent Tab Controller

4P420109-1 – 2015.10

Maintenance

11. Setting equipment in and out of

maintenance

The maintenance function sets or cancels the

Under Maintenance

status of management points in the management points register.

This function cannot set the intelligent Tab Controller itself into
maintenance, only the connected management points.

If you need to perform maintenance on one or more of the
management points, you will have to change their status to

Under

Maintenance

To change the maintenance setting of management points, proceed
as follows:

Click

Menu List (a)

System Settings (b)

Maintenance (c)

In the

Maintenance Settings

window, you can do the following:



Select the desired management points in the

Available

Management Points

list and

Add

them to the

Points under

Maintenance

list.



Select the desired management points in the

Points under

Maintenance

list and

Remove

them from this list.

Confirm any changes with

12. Upgrading the firmware

Daikin is constantly trying to improve your user experience. To let the
intelligent Tab Controller function as smoothly as possible, please
use the latest version of the firmware.

The latest version of both tools (version-up tool and commissioning
tool) is available on

http://www.daikineurope.com/support-and-

manuals/software-downloads/

If there is a more recent version of the firmware available, you can
upgrade this as follows:

Start the version-up tool

VerUpTool.exe

The login window will be displayed.

The first time you start this tool, the terms of use will be
displayed. Carefully read and accept the terms of use.

Enter the password (default: "

daikin

").

Make sure the IP address is the current IP address of the CPU
module.

Click

to log in.

CAUTION

Management points with the

Under Maintenance

status:



cannot be controlled from the intelligent Tab
Controller,



cannot be monitored, and



cannot be set as a target of automatic control
functions.

INFORMATION

The

Accept

button will only be enabled after you have

scrolled down and read all of the terms.

Содержание DCC601A51




























Результаты поиска

Содержание DCC601A51

Отзывы:

Похожие инструкции для DCC601A51

Бренды по названию

Популярные бренды

Daikin DCC601A51, Руководство по установке для специалистов

Результаты поиска

Содержание DCC601A51

Отзывы:

Похожие инструкции для DCC601A51

Бренды по названию

Популярные бренды