Installer reference guide
13
DCC601A51
intelligent Tab Controller
4P420109-1 – 2015.10
After restarting the commissioning tool and logging in to the local
commissioning tool, proceed as follows:
1
Click
Menu List (a)
>>
System Settings (b)
>>
Network (c)
.
2
In the
Network
window, set the network parameters (as
applicable for your network), similar to the following example.
3
Confirm the entered data by clicking
OK
.
4
Reset the LAN network settings of your computer to their original
values.
5
If you disabled it before, enable the Wi-Fi adapter of your
computer.
6
Remove the Ethernet cable between your computer and the
CPU module.
7
Connect an Ethernet cable between the CPU module and either
the local network, or the Daikin-supplied router (if applicable).
To configure the Daikin-supplied router, refer to
the Daikin-supplied router" on page 9
9.7.
Quick configuration of the connected devices
(local commissioning tool)
Before the intelligent Tab Controller can actually control any of the
connected (Daikin) devices, you will need to add them as so-called
management points.
For more info on management points, refer to
To add devices as management points, proceed as follows:
1
Start the commissioning tool.
2
Change the IP address to the newly set address.
3
Log in to the local commissioning tool.
4
Click
Menu List (a)
>>
Service Settings (b)
>>
Mgmt. Point
Data Register (c)
.
The
Mgmt. Point Data Register
window will be displayed.
INFORMATION
The CPU module will restart.
The commissioning tool will
not
automatically restart.
a
b
c
INFORMATION
If not already done in a previous step, we recommend to
restart the intelligent Tab Controller (by pressing the
RESET
button on the CPU module) before performing
local commissioning.
This clears the list of previously connected units that are no
longer connected to the intelligent Tab Controller. For more
information, refer to
"14. Known limitations" on page 24
.
a
b
c
