DCC601A51
intelligent Tab Controller
4P420109-1 – 2015.10
Installer reference guide
12
9.5.
First run of the commissioning tool
To start the commissioning of the intelligent Tab Controller, proceed
as follows:
1
Start the commissioning tool
CommissioningTool.exe
.
The startup window will be displayed.
2
The first time you start this tool, the terms of use will be
displayed. Carefully read and accept the terms of use.
3
Confirm that the IP address to connect to is: "
192.168.0.1
".
4
Click
Local Commissioning Tool
.
If the connection is successful, the local commissioning tool will
be displayed.
5
Enter the password (default: "
daikin
") and log in.
6
In the
Time Zone Settings
window, select the time zone of the
desired region from the list box and confirm by clicking
OK
.
7
In the
Time/DST Setup
window, set the following:
a.
Click
Modify
to set the current date and time.
b.
If summer time is applicable in your time zone, enable the
Daylight Saving Time Setting
.
c.
If so, select the
Start Date
and
End Date
of the Daylight
Saving Time Setting.
d.
Confirm the Time and DST settings by clicking
OK
.
8
In the
Function Mode Setting
window, select the function mode
you want the intelligent Tab Controller to function in:
Stand-alone Mode
, or
Cloud-connect Mode
.
For more info on both modes, refer to
9
If you want to use the intelligent Tab Controller app, click
Modify
to set the authentication code for the app.
10
Confirm all settings by clicking
OK
.
9.6.
Configuring the network settings (local
commissioning tool)
To let the intelligent Tab Controller function within your network, you
will need to configure the network settings.
INFORMATION
You will only go through this procedure during the first
installation. If you would move or reinstall this intelligent
Tab Controller, you will not go through this procedure
again.
INFORMATION
The
Accept
button will only be enabled after you have
scrolled down and have read all of the terms.
INFORMATION
The intelligent Tab Controller app can only work if you set
an authentication code.
For your own security, we recommend setting a strong
authentication code.
INFORMATION
The CPU module will restart.
The commissioning tool will
not
automatically restart. To
continue the commissioning, exit the commissioning tool
and start it again.
INFORMATION
Contact your network administrator for the following
network information in advance:
Controller Name (the name of the intelligent Tab
Controller as it will be displayed in your network)
Host Name
IP Address
Subnet Mask
Default Gateway
Preferred DNS
Alternate DNS (if applicable)
