manualshive.com logo in svg

Daikin Altherma 3 R ECH2O, Руководство по установке для специалистов, Страница: 299 / 316

Поделиться
Скачать
Daikin Altherma 3 R ECH2O Скачать руководство пользователя страница 299

18

 | 

Glossary

Installer reference guide

299

ERLA11~W1 + EBSH/X(B)11+16P30+50DF
Daikin Altherma 3 R ECH₂O
4P663482-1A – 2021.11

18 Glossary

Dealer

Sales distributor for the product.

Authorised installer

Technical skilled person who is qualified to install the product.

User

Person who is owner of the product and/or operates the product.

Applicable legislation

All international, European, national and local directives, laws, regulations
and/or codes that are relevant and applicable for a certain product or
domain.

Service company

Qualified company which can perform or coordinate the required service to
the product.

Installation manual

Instruction manual specified for a certain product or application, explaining
how to install, configure and maintain it.

Operation manual

Instruction manual specified for a certain product or application, explaining
how to operate it.

Maintenance instructions

Instruction manual specified for a certain product or application, which
explains (if relevant) how to install, configure, operate and/or maintain the
product or application.

Accessories

Labels, manuals, information sheets and equipment that are delivered with
the product and that need to be installed according to the instructions in
the accompanying documentation.

Optional equipment

Equipment made or approved by Daikin that can be combined with the
product according to the instructions in the accompanying documentation.

Field supply

Equipment NOT made by Daikin that can be combined with the product
according to the instructions in the accompanying documentation.

Содержание Altherma 3 R ECH2O





























































































































































































































































































































Отзывы:

Нет отзывов