![background image](http://html.mh-extra.com/html/daikin/2mks40fv1b/2mks40fv1b_service-manual_501074092.webp)
SiEN12-710A
Instruction
Operation Manual
81
"
What’s the HOME LEAVE operation
Is there a set temperature and air flow rate which is most comfortable, a set temperature and air flow
rate which you use the most? HOME LEAVE operation is a function that allows you to record your
favorite set temperature and air flow rate. You can start your favorite operation mode simply by
pressing the HOME LEAVE button on the remote control. This function is convenient in the following
situations.
"
Useful in these cases.
1. Use as an energy-saving mode
Set the temperature 2-3°C higher (cooling) or lower (heating) than normal. Setting the fan strength
to the lowest setting allows the unit to be used in energy-saving mode. Also convenient for use
while you are out or sleeping.
•
Every day before you leave the house...
•
Before bed...
2. Use as a favorite mode
Once you record the temperature and air flow rate settings you most often use, you can retrieve
them by pressing HOME LEAVE button. You do not have to go through troublesome remote control
operations.
NOTE
When you go out, push the “HOME LEAVE
Operation” button, and the air conditioner
will adjust capacity to reach the preset
temperature for HOME LEAVE Operation.
When you return, you will be
welcomed by a comfortably air
conditioned room.
Push the “HOME LEAVE Operation”
button again, and the air conditioner
will adjust capacity to the set
temperature for normal operation.
Set the unit to HOME LEAVE
Operation before leaving the living
room when going to bed.
The unit will maintain the
temperature in the room at a
comfortable level while you sleep.
When you enter the living room in the
morning, the temperature will be just
right.
Disengaging HOME LEAVE Operation
will return the temperature to that set
for normal operation. Even the coldest
winters will pose no problem!
•
Once the temperature and air flow rate for HOME LEAVE operation are set, those settings will be used whenever HOME
LEAVE operation is used in the future. To change these settings, please refer to the “Before using HOME LEAVE
operation” section above.
•
HOME LEAVE operation is only available in COOL and HEAT mode. Cannot be used in AUTO, DRY, and FAN mode.
•
HOME LEAVE operation runs in accordance with the previous operation mode (COOL or HEAT) before using HOME
LEAVE operation.
•
HOME LEAVE operation and POWERFUL operation cannot be used at the same time. Last button that was pressed
has priority.
•
The operation mode cannot be changed while HOME LEAVE operation is being used.
•
When operation is shut off during HOME LEAVE operation, using the remote control or the indoor unit ON/OFF switch,
“
“ will remain on the remote control display.
Содержание 2MKS40FV1B
