SQLC-220-086
4
② Current input
№
Setting item
Default settings
1 Display combination
Pattern
Pattern 15
Main monitor
A(V)
Sub-monitor (Left)
A(U)
Sub-monitor (Center)
A(W)
Sub-monitor (Right)
－
Bar graph
A(V)
2
Alarm output
(
３
)
Alarm 1
Factor
DA
Reset form
AUTO
Contact delay time
0 second
Test
－
Alarm 2
Factor
DA
Reset form
AUTO
Contact delay time
0 second
Test
－
3 Demand detection
Demand
current
Upper limit value
80.0A
Interval
0 second
4 Harmonic detection
Current
Distortion factor upper limit
OFF
5th conversion content rate upper limit OFF
nth content rate
Factor
5th
Upper limit
OFF
5th conversion detection characteristics
Inverse time delay mode
Average value time limit
0 minute
5 Backlight
Action
AUTO
Brightness
3（Middle）
6 Measurement range
Current range
100.0A
Current display peculiar sensitivity
100.0A
7
Analog output
(
３
)
Output factor 1
A(V)
Output factor 2
A(U)
Output factor 3
A(W)
Output factor 4
－
Output peculiar sensitivity
Current
100.0％
Low input cut
OFF
8
External operation
input (
３
)
Input 1 function
Alarm reset
Input 2 function
Max./Min. reset
9
Measurement display
ON/OFF
Current
ON
Harmonic current
ON
10 Input circuit
Phase line change
3φ3W (Fixed)
11 Measurement
Dead band
0.0％
Tidal current measurement
General measurement
12 Analog output specification (
３
)(
４
)
1 to 5V
13
Analog output
adjustment
(
３
)
Output 1
Bias adjustment
0.0％
Span adjustment
100.0％
Output 2
Bias adjustment
0.0％
Span adjustment
100.0％
Output 3
Bias adjustment
0.0％
Span adjustment
100.0％
Output 4
Bias adjustment
0.0％
Span adjustment
100.0％
Note(
３
) The setting item is not displayed in case there is no corresponding option.
The external operation input constitutes default value with an alarm output option.
If there is no alarm output option, the function is as follows.
Input 1 function：Max. / Min. reset, Input 2 function：Measurement factor change.
Note(
４
) Setting items are not displayed except for analog output DC0 to 5V or DC1 to 5V.
And analog output insulation product does not display a setting item.