Daiichi Electronics SQLC-110L Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 74

Daiichi Electronics SQLC-110L Скачать руководство пользователя страница 23

SQLC-220-086

22

(2) Reset of maximum value and minimum value

Reset of the various measurement values of maximum value and minimum value is performed.
This reset has two types of methods. (How to perform according to a measurement factor individual.
How to reset all maximum values and minimum values by package.)

a) Individual reset

Reset of only a certain differential maximum value or the minimum value is performed.
Other maximum values and minimum values are not reset by this operation.
① A measurement factor to reset is displayed. (General measurement maximum value, minimum value, or

Current, voltage harmonic measurement maximum display)

② Press RESET/SHIFT for longer than 1 seconds.

<Caution> An alarm output will be reset if this operation is performed by instantaneous measurement display.

Please be sure to perform this operation after displaying the maximum value and a minimum value
measurement factor to make it reset.

Maximum, Minimum measurement display
(General measurement maximum and minimum display) Reset completion

b) Package reset

Reset of all the maximum values and minimum value is performed.
In addition, setting can perform same operation in external operation input.
Please refer to "5.3.2 Setting mode 2 (4) external operation input setting" for the setting method,
Please refer to "6.3 Option" for the external operation input,

① Press  RESET/SHIFT  and   ＋  together for longer than 1 seconds.  By the maximum and the minimum measurement

display (The general measurement maximum and minimum display or current, voltage harmonic measurement maximum
display).

Maximum, Minimum measurement display
(General measurement maximum and minimum display) Reset completion

<Caution> In the general measurement maximum and minimum value reset, all the factors of general measurement

are reset by package. (The harmonic measurement maximum value is not reset.)
By harmonic measurement maximum value reset, a current factor and a voltage factor are reset by package.
(The general measurement maximum value and the minimum value are not reset.)

RESET/SHIFT

1 second

Instantaneous display

The range of minimum to maximum
is displayed in bar graph.

Minimum display

Instantaneous
display

Maximum display

Minimum display
(Reset)

Maximum display
(Reset)

Instantaneous display

The range of minimum to maximum
is displayed in bar graph.

RESET/SHIFT ＋＋

1 second

Minimum display

Instantaneous
display

Maximum display

Minimum display
(Reset)

Maximum display
(Reset)

«
...
21
22
23
24
25
...
»

Содержание SQLC-110L











































































Отзывы:

Нет отзывов