Daiichi Electronics SQLC-110L Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 74

Daiichi Electronics SQLC-110L Скачать руководство пользователя страница 18

SQLC-220-086

17

4.3 Operation

4.3.1 The main monitor display element change

The measurement display element of the main monitor is changed.  The change is performed by ＋－.
In addition to general measurement display, this operation can be performed also (harmonic measurement display,
maximum display and minimum display). However, in a harmonic measurement display, a sub-monitor changes with a
harmonic order. (The main monitor is distortion factor fixation.)
After changing a measurement display element, if a switch is not operated for 10 minutes, it will return to the
original measurement display element automatically.
In a harmonic measurement display and maximum display and minimum display, even if a switch is not operated for
10 minutes, it does not return to the original display.
Setting can perform same operation in external operation input. Please refer to "5.3.2 Setting mode 2, (4) external
operation input setting" about the setting method. Please refer to "6.3 Option specification" about external
operation input.

Main monitor A(U) Main monitor A(V) Main monitor A(W)
(Default display)

4.3.2 Phase (line) display change

Switches the current or voltage phase and line display. (Everything which is being indicated)
The change is performed by  DISPLAY . This operation can be performed also except a general measurement display
(harmonic measurement display, maximum display and minimum display).
In addition, after changing a phase (line) display, if a switch is not operated for 10 minutes, it will return
to the original phase (line) display automatically.
In a harmonic measurement display and maximum display and minimum display, even if a switch is not operated for
10 minutes, it does not return to the original display.
Setting can perform same operation in external operation input.  Please refer to "5.3.2 Setting mode 2, (4)
external operation input setting" about the setting method. Please refer to "6.3 Option specification" about
external operation input.

A(V)，V(UV) (Default display) A(W)，V(VW) A(U)，V(WU)

DISPLAY

A(V) display

No operation 10 minutes

DISPLAY

DISPLAY

W
display

V(UV)
display

Wh
display

＋

－

＋

－

＋

－

＋

－

A(V) display

W
display

No operation 10 minutes

V(UV)
display

Wh
display

«
...
16
17
18
19
20
...
»

Содержание SQLC-110L











































































Отзывы:

Нет отзывов