65
In Figure 4-66, please click direction arrows to adjust PTZ position. There are total 8 direction
arrows.
Figure 4-67
Here is a sheet for you reference.
Name
Function
key
function
Shortcut
key
Function
key
function
Shortcut
Key
Zoom
Wide
Far
Focus
Near
│
Far
►
│
Iris
Close
Open
Note
For HD-CVI protocol, you can use RS485 port to control the HDCVI camera. On the preview
interface, right click mouse and then select PTZ. Click the
of the Iris button, you can see the
corresponding menu.
4.9.9
Display
Display setup interface is shown as below. See Figure 4-68.
Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255.
Channel name: Here is for you to set camera channel name.
Time display: You can select to display time or not when system is playback.
Car number display: You can select to display plate number or not when system is playback.
GPS display: System displays GPS information in the screen for your reference.
Please note
only the unit of GPS module supports this function.
Resolution: Please note system needs to reboot to active current setup.
Image enhance: Check the box; you can optimize the margin of the preview video.
Live: It is to set volume when you are previewing.
Talk: It is to set volume when you are in bidirectional talk process.
Please highlight icon
to select the corresponding function.
After completing all the setups please click save button, system goes back to the previous menu.
