51
Redundancy: System supports redundancy backup function. It allows you backup recorded
file in two disks. You can highlight Redundancy button to activate this function. Please note,
before enable this function, please set at least one HDD as redundant. (Main
menu->Advanced->HDD Management).
Please note this function is null if there is only
one HDD.
Snapshot: You can enable this function to snapshoot image when an alarm occurs.
Record types: There are two types: regular, Alarm.
Holiday: Highlight the button here, the holiday settings in General interface (Chapter 4.9.1)
becomes activated.
Please highlight icon
to select the corresponding function. After completing all the setups
please click save button, system goes back to the previous menu.
At the bottom of the menu, there are color bars for your reference. Green colo r stands for
regular recording and red color stands for alarm recording.
Figure 4-46
4.9.4
RS232
RS232 interface is shown as below. There are five items. See Figure 4-47.
Function: There are various devices for you to select.
Console is for you to use the COM or mini-end software to upgrade or debug the
program.
The control keyboard is for you to control the device via the special keyboard.
Transparent COM (adapter) is to connect to the PC to transfer data directly.
Network keyboard is for you to use the special keyboard to control the device.
PTZ matrix is to connect to the peripheral matrix control.
Baud rate: You can select proper baud rate.
Data bit: You can select proper data bit. The value ranges from 5 to 8.
Stop bit: There are three values: 1/1.5/2.
Parity: there are five choices: none/odd/even/space/mark.
