43
same time, the ACC delay function is null.
Figure 4-32
4.8.6
Abnormal
Abnormal interface is shown as in Figure 4-33 and Figure 4-34.
Event type: There are several options for you such as disk error, no disk, no space, high
temperature, low battery, over speed, low speed and etc. (multiple choices).
Enable: Check the box here to enable this function.
Alarm output: Please select alarm activation output port (multiple choices).
Less than: You can set HDD threshold here so that system can alert you once the HDD
space is lower than the threshold here.
Latch: Here you can set corresponding delaying time. The value ranges from 1s -300s.
System automatically delays specified seconds in turning off alarm and activated output after
external alarm cancelled.
Show message: system can pop up the message in the local screen to alert you when an
alarm occurs.
Alarm upload: System can upload the alarm signal to the network (including alarm centre)
if you enabled current function.
Send email: System can send out email to alert you when an alarm occurs.
Restart system: If you highlight the button here, system will restart automatically if there is
no HDD.
Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.
