Dahua MCVR5104GCW Скачать руководство пользователя

Страница: 68 / 142

You need to set for each alarm channel on the Alarm in item if the device has connected

several alarm channels.



Alarm in: Here is for you to select channel number.



Event type: There are two types. Local input/network input alarm.



Local input alarm: The alarm signal system detects from the alarm input port.



Network input alarm: It is the alarm signal from the network.



Enable: Please you need to highlight this button to enable current function.



Type: Normal open or normal close.



Trigger: Here is for you to set activation mode. There are two options: High/low.



Alarm name: You can input customized name here.



Overlay: Please highlight the box here to enable this function. It can overlay alarm

information on the video screen when an alarm occurred.



PTZ activation: When an alarm occurred, system can activate the PTZ operation such as

preset x.



Anti-dither: Here you can set anti-dither time. The value ranges from 5 to 600s. The

anti-dither time refers to the alarm signal lasts time. It can be seem as th e alarm signal

activation stays such as the buzzer, tour, PTZ activation, snapshot, channel record. The stay

time here does not include the latch time. During the alarm process, the alarm signal can

begin an anti-dither time if system detects the local alarm again. The screen prompt, alarm

upload, email and etc will not be activated. For example, if you set the anti -dither time as 10

second, you can see the each activation may last 10s if the local alarm is activated. During

the process, if system detects another local alarm signal at the fifth second, the buzzer, tour,

PTZ

activation, snapshot, record channel will begin another 10s while the screen prompt,

alarm upload, email will not be activated again. After 10s, if system detects another alarm

signal, it can generate an alarm since the anti-dither time is out.



Alarm output: The number here is the device alarm output port. You can select the

corresponding ports(s) so that system can activate the corresponding alarm device(s) when

an alarm occurred.



Latch: When the anti-dither time ended, the channel alarm you select in the alarm output may

last the specified period. The value ranges from 1 to 300 seconds. This function is not for

other alarm activation operations. The latch is still valid even you disable the alarm event

function directly.



Show message: System can pop up a message to alarm you in the local host screen if you

enabled this function.



Alarm upload: System can upload the alarm signal to the network (including alarm centre

and the WEB) if you enabled current function. System only uploads the alarm channel

status. You can go to the WEB and then go to the Alarm interface to set alarm event and

alarm operation. Please go to the Network interface to set alarm centre information.



Send email: System can send out the alarm signal via the email to alert you when alarm

occurs. Once you enable the snap function, system can also send out an image as the

attachment. Please go to the Main Menu->Setting ->Network->Email interface to set.



Record channel: you can select proper channel to record alarm video (Multiple choices).



You need to set alarm record mode as Schedule in Record interface (Main

Menu->Advanced->Record). Please note the manual record has the highest priority.

System record all the time no matter there is an alarm or not if you select Manual mode.

Содержание MCVR5104GCW















































































































































Результаты поиска

Содержание MCVR5104GCW

Отзывы:

Похожие инструкции для MCVR5104GCW

Бренды по названию

Популярные бренды

Dahua MCVR5104GCW, Руководство пользователя

Результаты поиска

Содержание MCVR5104GCW

Отзывы:

Похожие инструкции для MCVR5104GCW

Бренды по названию

Популярные бренды