Dahua ARK50C-R, Руководство пользователя

Страница: 15 / 91

User’s Manual
9
key/Icon Name Description
You can press in any mode.
Enter Press to confirm.
Operation Modes and Passcodes
Use the keypad by directly entering command under operation mode. Operation mode is divided
into programming and walk test modes which cannot be logged into at the same time. When exiting
from the programming mode, the keypad returns to global mode by default. When there are no
operations for 3 minutes under programming mode, the keypad returns to global mode
automatically.
The default passcode is different for each user type, which includes administrator, installer,
manufacturer and operator.

The default passcode of admin is 1234.

The default passcode of installer is 9090.

The default passcode of manufacturer 2008.
User Permissions
Permissions vary for different users.
Table 3-2 Description of user permissions
User Description
Administrator
Arm, disarm, cancel alarm, unbypass, bypass, isolate, configure forced arm, manage
users, add or edit configuration parameters.
Installer All permissions of the admin (including walk test) except disarming.
Manufacturer Manage users, edit basic programs, such as updating program.
Operator Arm, disarm, cancel alarm, unbypass.
Global Mode

The zone number contains 3 digits, ranging from 001 to 256. It uses 0 as placeholder in front
when there are less than 3 digits (e.g. 10 becomes 010).

The subsystem number contains 2 digits, ranging from 001 to 256. It uses 0 as placeholder in
front when there are less than 2 digits (e.g. 8 becomes 08).

The relay number contains 3 digits, ranging from 01 to 08. It uses 0 as placeholder in front when
there are less than 3 digits (e.g. 10 becomes 010).

All objects with the consecutive operation function support up to 16 operations in a row. For