DH-LDHxx-TAI200
18
6.4. Configuring Auto Reboot Time
Configure an auto reboot time for your device. And your device will
reboot at a fixed time every day.
Step 1 In main menu, select Settings > Maintenance and Upgrade.
The Maintenance and Upgrade interface is displayed.
Step 2 Click Auto Maintenance Time Setting.
The Auto Maintenance Time Setting interface is displayed. See Figure
6-3.
Figure 6-3 The auto maintenance time setting interface
Step 3 Drag your mouse up and down to select a time. Click any
position out of the Auto Maintenance Time Setting interface to finish
configuration.
6.5. Upgrading System
Preparation
Insert an USB with the upgrade package into your device. Contact
our customer service center to get an upgrade package.
Procedure
Step 1 In main menu, select Settings > Maintenance and Upgrade.
The Maintenance and Upgrade interface is displayed.
Step 2 Click System Upgrade.
The System Upgrade interface is displayed. See Figure 6-4.
D or E represents your USB.
Figure 6-4 The system upgrade interface
Step 3 Select an upgrade package to start upgrade.
After being upgraded, your device reboots.
6.6. Restoring Your Signage to Factory
Settings
Restore your device to factory settings to handle problems such as
storage insufficiency and system error. Be cautious because this may
cause data lose.
Step 1 In main menu, select Settings > Maintenance and Upgrade.
The Maintenance and Upgrade interface is displayed.
Step 2 Click Restore Factory Defaults.
The Restore Factory Defaults interface is displayed. See Figure 6-5.
Figure 6-5 The restore factory defaults interface
Step 3 Click Confirm to begin this operation.
After that, your system will reboot.
7. Input Mode
Recommend Resolution
VGA: 1920x1080
HDMI: 1920x1080