Dahua Technology DH-LDH Series, Руководство пользователя, Страница: 20 / 28

DH-LDHxx-TAI200
13
4.6.1.2.2 Configuring Whitelist
Configure the IP that are allowed to access the Signage, and only IP
addresses in the whitelist can access the Signage. This is to enhance
data security.
Step 1 In main menu, click Settings > Network Setting > Whitelist.
The Whitelist interface is displayed.
Step 2 Click
to enable whitelist and make it take effect
officially.
Step 3 Add an IP address to your whitelist.
1)
Click .
The Add Whitelist interface is displayed. See Figure 4-8.
Figure 4-8 The add whitelist interface
2) Type an IP address.
3) Click Confirm.
The IP address you have added is displayed.
Repeat Step 3 to add multiple IP addresses to your whitelist.
4.6.1.3 Connecting Signage to platform
Connect the Signage to the platform. Then you can use the platform to
send programs.
To use the platform to send programs, stop playing programs from the
USB drive first.
Preparation
• Your Signage and the platform have been connected to each other.
To connect Signage to network, see “4.6.1.2.1 Connecting Signage to
Network.”
• Ensure the platform’s IP address has been added to your whitelist if
you have enabled it. To configure whitelist, see “4.6.1.2.2 Configuring
Whitelist.”
Procedure
Step 1 In main menu, click Network Release.
The Platform Address interface is displayed. See Figure 4-9.
Figure 4-9 The platform address interface
Step 2 Type the platform’s IP address or domain name.
Step 3 Click OK.
Step 4 Receive programs from the platform.
4.6.2 Displaying Programs from USB Drive
4.6.2.1 Releasing Programs by General Templates
4.6.2.1.1 Quick Play
Use the given templates to quickly release information.
Preparation
You have inserted your USB into the Signage. You need to previously
prepare images or videos in your USB and you must save them under
a file named after “USBPLAY.”
Procedure
Step 1 In the main menu, select Local Release > General > Quick
Play.
The Quick Play interface is displayed. See Figure 4-10.
Figure 4-10 The quick play interface
Step 2 Select a template.
The system will display images & videos information according to their
layout in the template. And, an image is displayed for 10 seconds by
default and a video to the end.
4.6.2.1.2 Customized Play
Define your own templates to release information.
Step 1 In the main menu, select Local Release > General >
Customized Play.
The Customized Play interface is displayed. See Figure 4-11.