Dahua Technology DH-LDH Series, Руководство пользователя, Страница: 19 / 28

DH-LDHxx-TAI200
12
Table 4-1 Description of quick tool bar
Icon Description
Click this icon to adjust the backlight value.
Click this icon to select an input source from
“
Local
” 、
“
HDMI
”
or
“
VGA
”
Click this icon to enter the quick play interface.
Click this icon to lock your Signage.
Click this icon to disconnect your USB from the Signage.
4.5. Configuring Date & Time
You can set date and time for your device. Remember to select a
correct time zone based on where the device lies.
Step 1 In the main menu, select Settings > Date & Time.
The Date & Time interface is displayed. See Figure 4-5.
Figure 4-5 The date & time interface
Step 2 Set date, time and time zone. You can also enable the 24-
hour display format here.
Your settings will take effect at once.
4.6. Displaying Programs
Connect the Signage to the platform and then you use the platform
to send programs to your Signage. Or, you can insert a USB drive
into the Signage and operate the Signage to play the videos &
pictures in the USB.
4.6.1 Displaying Programs from Platform
4.6.1.1 Procedure
Figure 4-6 Procedure
Table 4-2 Procedure description
No. Description No. Description
1 Logging in 2 Connecting Signage to
network
3 Connecting Signage to
platform
4 Receiving programs
from platform
4.6.1.2 Connecting Signage to Network
4.6.1.2.1 Connecting Signage to Network
Connect your device to network by Ethernet, WLAN, 4G or Virtual
Private Network (VPN).
After your Signage is networked, it can be used as a hotspot for other
devices.
Step 1 In main menu, select Settings > Network Setting.
The Network Setting interface is displayed. See Figure 4-7.
Figure 4-7 The network setting interface
Step 2 Select and configure the network type you want to use. See
Table 4-3 for details.
Table 4-3 Network types description
Network
Type
Description
Ethernet Connect your Signage to network by Ethernet and
there are two kinds of methods for you to give an IP
to your Signage.
• DHCP: When there is a DHCP server in the
network, after selecting the DHCP option, the
Signage automatically obtains IP address from the
DHCP server.
• Static IP: After selecting Static IP, respectively click
IP ADDRESS, DEFAULT GATEWAY or NETMASK,
and enter the IP address, default gateway and net
mask according to the network plan.
WLAN
Connect your Signage to network by Wi-Fi.
Click
to turn on Wi-Fi first. Then, to connect
your Signage to network, you can:
• Click a given Wi-Fi, type its password and click
Connect.
• Or you can add a Wi-Fi manually: click to
display the Add Network interface. Then type
Network SSID and select Security from None,
WEP, WPA/WPA2 PSK and 802.1x EAP. Click Save
to finish configuration
4G You can connect a 4G mobile network card to your
device and select Data Enabled to finally get your
device networked.
VPN Connect your device to VPN. Then your device can
get programs from VPN.