3.Installation
© 2023 China Daheng Group, Inc. Beijing Image Vision Technology Branch 7
3.2.2.
ME2S Series
Due to different power consumption, Camera power are divided into two types:
Type 1: Camera is powered by the USB 3.0 interface.
Type 2: High power consumption camera recommends get power from the Hirose I/O port, and the
operating voltage is +12VDC (±10%) ~ +24VDC (±10%). The model that recommends external power
supply has been marked in the factory. If the power supply to the USB 3.0 interface is insufficient, the
camera may not work properly.
Cameras that require an external power supply will only work if the USB3.0 cable and the external
power supply are properly connected to the camera at the same time.
3.3.
Camera Driver Installation
3.3.1.
System Requirements
GalaxySDK is suitable for all cameras in the MERCURY2. The GalaxySDK contains various operating
systems such as Windows, Android and Linux. The requirements for the operating system and version of
the installation package are as follows:
Operating Systems
Applicable Version
Windows
Windows 7 (32bit, 64bit)
Windows 10 (32bit, 64bit)
Windows 11 (64bit)
Linux
Ubuntu 12.04 or above, kernel version 3.5.0.23 or above
Android
Android 6 or above
3.3.2.
Driver Installation
The steps to install the Galaxy SDK under Windows are as follows:
1)
Download the corresponding version of the installation package from
www.daheng-imaging.com/en/Downloads
2)
Run the installer.
3)
Follow the instructions of the installation wizard to complete the installation process. During the
installation process, you can choose the camera interface you need (USB2.0, USB3 Vision, GigE
Vision, etc.).
During the installation process, especially when installing the *.sys file, you must always pay attention to
whether the anti-virus software intercepts the driver. If intercepted, it may cause the driver installation to
fail.