Daedong Kioti RX6020 Скачать руководство пользователя страница 196

Страница: 196 / 262

rx6020 / rx6620 / rx7320 / rx7620

lUBRICANTs

to prevent serious equipment damage, use only genuine

kIOTI

fluids, oils and greases, or equivalents.

No.

section

Capacity [U.S.gal. (L)]

lubricants

fuel

25.1 (95)

unleaded diesel

coolant

2.4 (9.1)

an anti freezing solution (ethylene glycol) + pure water (50:50)

engine oil

2.2 (8.3)

Oil specification :

tier2 or 3 (without Dpf) - api ch grade above

tier4 (with Dpf) - api cJ grade above

oil viscosity : sae 10w30, 10w40, 15w40

transmission oil

15.9 (60)

Daedong : utf 55
shell : Donax-tD,

Exxonmobil : Mobilfluid 424

exxon hydraul 560

Bp : tractran uth

front axle oil

2.2 (8.5)

sae 90 gear oil or better, or same as t/m oil

apply grease

• front axle support

• Brake pedal

• Brake lever

• top link holder

• control lever

a little

sae multi purpose type grease

Check the oil level regularly. Correct the oil level, if needed, before operating.

Always check and add oil with the tractor on a flat, level surface.

•

WARNING

TF110(RX7320)ROPS합본-US,EU,AU-07.8 8

2016-05-10 오전 8:50:43

Содержание Kioti RX6020







































































































































































































































































Результаты поиска

Содержание Kioti RX6020

Отзывы:

Daedong Kioti RX6020, Руководство пользователя, Страница: 196 / 262

Результаты поиска

Содержание Kioti RX6020

Отзывы: