Daedong Kioti RX6020, Руководство пользователя, Страница: 150 / 262

5
-
10
RX6020 / RX6620 / RX7320 / RX7620
(1) dead Battery (2) Jumper Cables (-)
(3) Jumper Cables (+) (4) Helper Battery
If the battery is discharged and the
engine cannot be started, it is possi-
ble to start the engine by connecting
the discharged battery to a battery
from another tractor or other extra
battery.
JUMP STARTING
T11O502A
1. Check that the rated voltage of
the discharged battery is same as
the voltage of the other tractor or
vehicle for jump start (specification
for this tractor: 12 v).
2. Check the length of the jump cable
and position another tractor near
the tractor with the discharged bat-
tery. Then, put all the shift levers
in the neutral position, apply the
parking brake, and stop the en-
gine.
3. Wear protective glasses and
gloves and open the hoods of both
tractors. Remove the battery termi-
nal cover as necessary.
4. Connect the alligator clips on both
ends of the red positive cable to
the positive terminals of both bat-
teries.
5. Connect one clip of the black
negative cable to the negative
terminal of the normal battery
and the other clip to the tractor
body with the discharged battery.
make sure to connect the clip to
the body part without paint.
6. Start the engine of the tractor
with the normal battery.
7. Start the engine of the tractor
with the discharged battery.
8. disconnect the black cable from
the negative battery terminals of
both of the tractors.
9. disconnect the red cable.
10. Run the engine for at least 30
minutes to charge the discharged
battery.
11. If the battery is discharged again,
replace it or check the charging
system, such as the alternator.
TF110(RX7320)ROPS합본-US,EU,AU-05.10 10 2016-06-07 오후 7:20:26